Home About us Products Models News Honor Network Contact us Substation
location:Home > Heavy Duty conveyor pulleyNews > Rolling bearing; outer sphere

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Rolling bearing; outer sphere
Clicks:4445 Date:8-12
Rolling bearing; outer sphere; maintenance procedure
Rolling bearings need regular maintenance and maintenance. Regular maintenance of rolling bearings is an important link in normal operation of machinery. If the maintenance and maintenance of the ball bearings are better, the mechanical work efficiency can reach a high level. On the contrary, it will reduce the service life of bearings, and affect the work efficiency of machinery, and even some mechanical accidents.
In order to make full use of the bearing and maintain its proper performance for a long time, it is necessary to do a good job of regular maintenance (regular inspection). It is very important to improve the productivity and economy by properly checking regularly and finding faults early and preventing accidents.
Rolling bearing; outer sphere; maintenance procedure:
When the bearing is removed, the photographic record shall be made by photography or other methods. Also, confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearings.
1. The cleaning of the bearings is divided into coarse cleaning and fine washing, and the metal mesh can be placed at the bottom of the container used.
2, rough wash, in the oil with a brush, such as cleaning grease or adhesive. At this point, if the outer spherical bearings are rotated in the oil, attention will be paid to the rolling surface due to foreign bodies.
3, the fine washing, slowly rotating bearings in the oil, must be carefully carried out. The usual cleaning agents are neutral, non water containing diesel or kerosene, and sometimes warm lye is used according to requirements. No matter what kind of cleaning agent you use, always filter and keep it clean.
4, after cleaning, immediately on the outer spherical bearing coating rust protection oil or rust preventive grease.
Previous article: The importance of assembly process for self-aligning ball bearings      Next article: Oil bearing features
Recommended reading
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Selection of self aligning ball bearing 2018.1.4
The common sense of self aligning ball bearing 2018.1.10
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.